TDK Lambda Americas Inc
TDK-Lambda power supply banner image Lambda celebrates its 60th anniversary
Português
Español
Product Index
AC/DC
DC/DC
Configurable
EMI Filters
Lab
Racks
Value Added
Older Models
Product Selector
RoHS
Press Releases
News Room
 
Email Notification
 
Customer Survey
Sales Offices
Directions
Contact Us
Sales Reps
Distributors
Fixed Output Home
Programmable Home
TDK
TDK-Lambda Americas
Employment
Approvals

 


August 27, 2004 Editor Contacts:
Stan Michelson, Focus Communications
562-283-0388
stan@4focus.com

Lambda Adds Low-Profile, Hot-Swappable 1000W Power Supplies with Available I2C Monitoring

SAN DIEGO, CA (August 27, 2004) - Lambda has launched the FPS1000-48, the first in a series of 1000-watt power supplies whose low profile and hot-swap capability make them especially suitable for N+1, redundant applications. The series is available with an I2C interface that monitors key functions – a requirement for remotely situated systems.

Rated at 48 volts/21 amps, the FPS1000-48 accepts a wide range of input voltages – from 85 to 265 VAC – and contains active PFC (power factor correction) circuitry to meet EN61000-3-2 standards. It meets Class B EMI standards – radiated and conducted – with an earth leakage current of less than 1.1 milliamps at 265 VAC.

As many as three FPS1000-48 units fit into an optional 1U high, 19-inch wide shelf, for a total system power of 3000 watts; individually the units measure 1.61 x 5 x 13.8 inches. Up to eight supplies can share a single bus, with a selectable address setting included in the shelf. Customers may specify front or rear AC input IEC320 receptacles.

To enhance system flexibility, the supplies come with an opto-coupled isolated remote on/off, AC fail, DC OK and over-temperature signals. The I2C interface provides read-back on output voltage, output current, internal temperature and alarm status.

The power supplies operate in temperatures ranging from 0oC to 50oC full load and are cooled by internal variable-speed fans. All models are RoHS compliant, carry the CE mark, and conform to UL60950-1 and EN60950-1 standards.

The FPS1000-48 is available now, priced at $400 in 100-unit quantities. More information can be obtained at Lambda’s Web site, www.lambdapower.com.

For more than 50 years, Lambda has been a leading provider of standard and custom power supply solutions. The company's broad range of products power industrial, telecommunications, data communications, medical, and test-and-measurement applications worldwide. Lambda's corporate headquarters is at 3055 Del Sol Blvd., San Diego, Calif., 92154; telephone 800-LAMBDA4 (toll free) or 619-575-4400; fax 619-429-1011.

- ### -

For additional photo formats – including color transparencies, 35mm slides, B&W prints, or electronic files of the attached image(s) – please phone Focus Communications at 562-283-0388.

 

© Copyright 2000-2008 TDK-Lambda Americas Inc., a TDK Company
All rights reserved. Legal information

rmation